Automatic Water Distillation Equipment (Cabinet Model)


Compact & User Friendly

This is a fully automatic water distillation equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp borosilicate glass or quartz glass.
The distillation has following features :

  • Replaceable Silica Sheathed (Quartz) Heater : The horizontal jacket is fitted with removable
    silica sheathed heater and screw threaded connectors for ease of cleaning.
  • Distillate temperature is approx. between 25° to 45° C which is ensured by an efficient condenser.
  • The stand is powder coated for rust free operation and lustrous appearance.
  • Cooling water from condenser is re circulated into the boiling chamber, hence saving energy.
  • Screw Threaded Connectors : These are provided for easy plumbing & Installation to avoid any glassware breakage during assembly.
  • Fuse is provided for safety in case of voltage fluctuation or short circuit.
  • Boiler is provided with Replaceable Constant Level Device for easy draining and cleaning of boiling chamber.
  • The front cover is easily removable making the access to the glass parts very easy.
  • Electrical Power: 220/240 V, 50/60 Hz, Single Phase Supply

This has been designed for better and accurate control of the distillation unit. It has been incorporated with advanced microprocessor based electronic circuitry, which gives an easy user machine interaction.
The alpha numeric LCD which has been used shows all messages that correspond to the running
of the machine.
Also there is alarm system which beeps as and when user attention is required.

Available Options

SKUOutput Cap. (Approx.)StageDistillate QualityConductivity uS / cmCooling Water Consumption (approx.)Power Rating TotalQuantity 
AMCM-20S2.0 ltr / hrSingle StagePyrogen Free1.0 - 2.01.5 ltr / Min1.5 Kw
AMCM-20D2.0 ltr / hrDouble StagePyrogen Free0.8 - 1.02.0 ltr / Min3.0 Kw
AMCM-40S4.0 ltr / hrSingle StagePyrogen Free1.0 - 2.02-3 ltr / Min3.0 Kw
AMCM-40D4.0 ltr / hrDouble StagePyrogen Free0.8 - 1.02-4 ltr / Min6.0 Kw


Additional Built-in Safety Features

  • Gate Valve : Conserves cooling water wastage in case of power failure.
  • Flow Switch : In-built safety feature for the equipment unit shut off in case of cooling water failure.
  • Temperature Switch : The boiler is equipped with a safety temperature switch which shuts off the unit if water level in the boiler falls below the heater, thus saving the glass parts from any damages.
  • Level Sensor : It shuts off the distillation equipment if the water level in the boiler falls
    below the heater.
  • Reservoir Level Sensor : This helps in automatic working of the water distillation equipment. Depending on the water level in the reservoir it will automatically switch On/Off the  equipment, thus saving energy. (Reservoir can also be provided with a storage capacity of 5 ltr, 10 ltr & 20 ltr made of Borosilicate Glass or polypropylene).

**All the parameters are under Standard Test Conditions.
**Output quality would depend upon the quality of inlet feed water.

Additional information

Output Cap. (Approx.)

2.0 ltr / hr, 4.0 ltr / hr


Single Stage, Double Stage

Distillate Quality

Pyrogen Free

Conductivity uS / cm

1.0 – 2.0, 0.8 – 1.0

Cooling Water Consumption (approx.)

1.5 ltr / Min, 2.0 ltr / Min, 2-3 ltr / Min, 2-4 ltr / Min

Power Rating Total

1.5 Kw, 3.0 Kw, 6.0 Kw


There are no reviews yet.

Be the first to review “Automatic Water Distillation Equipment (Cabinet Model)”

Your email address will not be published. Required fields are marked *